Publications


ZEB Pilot buildings – overview
Authors: Publication Year: 2016


Abstract Zero Energy Buildings (ZEBs) are considered as one of the key elements to meet the Energy Strategy of the European Union. This paper investigates cost-optimal solutions for the energy system design in a ZEB and the subsequent grid impact. We use a Mixed Integer Linear (MILP) optimisation model that simultaneously optimises the building’s energy system design and the hourly operation. As a ZEB have onsite energy generation to compensate for the energy consumption, it is both importing and exporting electricity. The hourly time resolution identifies the factors that influence this import/export situation, also known as the building’s grid impact.…

Abstract The study presented in this paper originated from observations made regarding the thermal conditions during winter in highly insulated dwellings with mechanical ventilation with heat recovery (MVHR). Previous observations indicate an oversupply of heat to bedrooms and a successive extensive window ventilation, which leads to an increased space-heating demand. Detailed simulations were conducted to explain the causes for the observed thermal conditions and to elaborate improved solutions for heating and ventilation during winter. Various MVHR solutions and control strategies, as well as building design solutions, were investigated regarding their impact on the thermal conditions in bedrooms and on the…

Abstract The Zero Village Bergen consists of a total floor area of ca. 92 000 m2, with more than 700 dwellings divided between terraced houses (68% of total floor area) and apartment blocks (25%) and some area dedicated to non-residential purposes such as offices, shops, and a kindergarten (7%). The project is currently in the planning phase and the strategy for achieving the ZEB-O goal1 is based on three steps: first, minimize energy demand through energy efficiency of the buildings; second, maximize PV generation on the buildings' footprint; and third, consider additional measures onsite and nearby (e.g. local heating system…

Abstract This paper investigates the drivers and barriers for green leasing associated with the relationship between building owners and tenants, whilst also considering the extent to which this should be considered during the life cycle phases of a building. The procurement of appropriate rental property and its services is an important consideration for businesses. In terms of issues associated with this, few are more topical than factoring in sustainability. Emerging from this trend is a leasing product that deals with this directly. This product is a green lease. This not only impacts on the operations associated with a tenancy, but…

AbstractPrevious studies show that a large part of the net energy demands of an office building is related to window heat loss and cooling demands induced by solar irradiance. Windows with improved thermal transmittance (U-value) and solar heat gain coefficient (SHGC or g-value) are important for reducing the related energy demands.There is a scarcity of available scientific work addressing multilayer window technologies. Hence, in this study, simulations with the aim of identifying the parameters that play a key role in improving thermal performance of multilayer glazing units have been carried out. A state-of-the-art review is presented, alongside an overview of…

Abstract Today energy-efficient and energy-harvesting buildings experience an ever-increasing interest and demand. Building integrated photovoltaics (BIPV) may in this respect represent a powerful and versatile tool for reaching the goal of zero energy and zero emission buildings. The BIPV systems replace the outer building envelope skin, thus serving simultanously as both a climate screen and a power source generating electricity. However, snow and ice formation on the exterior solar cell surfaces reduce their performance and may also lead to faster deterioration. Hence, if one could find a way to develop solar cells which were able to avoid snow and ice…

Abstract The recent building practices have shown that aerogel glazings can be used as a multifunctional building envelope component for different purposes. Nevertheless, the distinctive physical properties and energy performance of aerogel glazings suggest that building integration of aerogel glazings may create architectural challenges, aesthetic problems, as well as concerns on their durability and environmental impact, thus highlighting the importance of developing guidelines to regulate the use of aerogel glazings in the building sector. This study discusses various approaches for the building integration of aerogel glazings by presenting a number of successful examples; the advantages of integration are quantified and…

Abstract The scope of this study is a comprehensive analysis of the greenhouse gas emissions from the partial substitution of triple-glazing units with argon gas (U-value of 0.79 W/m2 K) with double-glazing units with either monolithic aerogel (U-value of 0.65 W/m2 K) or granular aerogel (U-value of 0.31 W/m2d K). A residential building located near Oslo and fully upgraded with passive house solutions is used as a case study for this analysis. A cradle-to-site analysis is performed on the facade components. Two replacement schedules and three window-to-wall ratios are used to evaluate the differences in total emissions. Sensitivity analyses based on increasing the fraction of the…

Abstract This paper presents an analysis of how the design of a photovoltaic (PV) system influences the greenhouse gas emission balance in a net zero emission building (nZEB). In a zero emission building, the emissions associated both with the energy required in the operation of the building (operational emissions) and the energy used to produce the building materials (embodied emissions) are offset by renewable energy generated on-site (avoided emissions). The analysis is applied to a nZEB concept for a single-family building, developed by the Norwegian Research Centre on Zero Emission Buildings. Previous analyses have shown that the installation of a…

Abstract Greenhouse gas (GHG) emissions from the combustion of fossil energy need to be reduced to combat global climate change. For zero energy and Zero Emission Buildings (ZEB), photovoltaic solar energy systems are often installed. When the goal is to build a life cycle Zero Emission Building, all emissions come under scrutiny. Emissions from photovoltaic (PV) energy systems in Zero Emission Buildings have been shown to have a relative large share of material emissions. In this paper, we compare GHG emissions per kW h of electricity and greenhouse gas emission payback times (GPBT) for three residential PV systems in Zero Emission…

Abstract This paper deals with the search for the optimal window-to-wall ratio (WWR) in different European climates in relation to an office building characterized by best-available technologies for building envelope components and installations. The optimal WWR value is the one that minimizes, on an annual basis, the sum of the energy use for heating, cooling and lighting. By means of integrated thermal and lighting simulations, the optimal WWR for each of the main orientations was found in four different locations, covering the mid-latitude region (35° to 60° N), from temperate to continental climates. Moreover, the robustness of the results was…

Abstract Living Lab is a two bedroomed detached house on the edge of the university campus in Trondheim. It is also a research laboratory which is testing state of the art technology committed to achieving Zero emissions within a 100m2 dwelling. The first qualitative experiment in Living Lab will take place from September 2015 to April 2016, when six different resident groups comprising of two to four people, will make Living Lab their home for a period twenty-five days each. The resident groups were chosen because they are associated with three basic demographic categories; students under 30 who are already…

Abstract The Trondheim living lab is a newly built detached single family home that is planned to reach a zero emission balance over the course of its lifetime. This is achieved by a broad variety of technical strategies such as passive and active energy design and efficient installations. The degree of automation of the building's environmental services (such as heating, cooling, ventilation, and light) has been left open to be able to test different control scenarios: manual, automatic and several modes combining both approaches. In the first wave of qualitative experiments conducted in the laboratory between September 2015 and March…

Abstract A crucial property for double-glazed sealed insulating window panes is to maintain their thermal insulating properties and thus low U-values. However, degradation and thus subsequent reduction or loss of low-conductance gas concentration may occur in the sealed glazing units by their exposure to outdoor climate. The choice of spacers is important to keep as low thermal transport through the window panes as possible, i.e. low U-value. In addition, the type of spacers may also influence their durability and resistance towards ageing, which hence may be characterized by the low-conductance noble gas concentration, e.g. argon, krypton or xenon. Ageing and…

Plusshus med potensial
Authors: Publication Year: 2016


Abstract The effect of elevated temperature during storage and curing of ultra-high performance concrete (UHPC) formulated aerogel-incorporated mortar (AIM) samples was investigated. It was found that an effective aerogel loading of 60 vol% of total bulk volume was possible for producing AIM samples with suitable thermal and mechanical properties under optimized storing and curing conditions. AIM samples with compressive strengths of up to ≈19 MPa was achieved and the corresponding thermal conductivity was ≈0.4 W/(mK). For more insulating concrete, 70 vol% aerogel was needed and AIM samples with thermal conductivity as low as ≈0.1 W/(mK) were cast. In general, AIM samples with strengths of up…

En perle av et miljøbygg
Publication Year: 2016


Search our website

Sort publications by:

Ascending order

Filter Publications: